Friction stir welding uses frictional heat combined with precisely controlled forging pressure to produce high integrity, full penetration welded joints that are virtually defect free. Due to a very low welding temperature, mechanical distortion is practically eliminated, with minimal heat affected zone, and an excellent surface finish. The FSW process is effective on flat plated, cylindrical components and even parts of irregular thickness.
The HT-JC6x8/2 Friction Stir Welding Equipment(FSW Equipment) is suitable for plane 2D friction stir welding of thin plate products, which occupies small area but has stable structure.
Technical Specifications
| Machine Model | HT-JC6×8/2 |
||
Welding Thickness |
mm |
Aluminum2~6 |
|
Working Table (Width×Length) |
mm |
600×800 |
|
Gantry Net Height |
mm |
0~500/200~300 |
|
Stroke |
X Axis |
mm |
800 |
Y Axis |
mm |
600 |
|
Z Axis |
mm |
300 |
|
C Axis |
° |
n×360 |
|
B Axis |
° |
0~5 |
|
Fast Moving Speed |
X Axis |
mm/min |
7000 |
Y Axis |
mm/min |
7000 |
|
Z Axis |
mm/min |
3000 |
|
B Axis |
rpm |
Manual |
|
Spindle Maximum Speed |
rpm |
4000 |
|
Machine Outline Dimension |
mm |
2700×2600×2700 |
|
Equipment Features
* This FSW equipment is with compact structure to save space;
* Small welding thickness with low cost and highly cost effective;
Typical Application
New energy automobile battery water-cooling plate, electric driver, motor water-cooling jacket, electronic radiator, etc.
|
Electric Controller |
Motor Shell |
Radiator Cold Plate |
http://www.aee-fsw.com/